Enterprise Development-Suzhou Hengdian Energy Technology Co., Ltd.

COMPANY INTRODUCTION

Suzhou Hengdian Energy Power Technology Co., Ltd. was established in 2019 with a registered capital of 20 million yuan, and the company has more than 100 employees and more than 30 engineering and technical personnel. It is mainly engaged in the research and development, manufacturing and sales of lithium battery packs, electrical automation and industrial automation products, as well as the research and development and sales of new energy high and low voltage systems and energy storage systems. The company has won the titles of Jiangsu Province High-tech Enterprise, Jiangsu Private Science and Technology Enterprise, etc., and strictly operates ISO9001, ISO14001, ISO45001, GJB9001C, safety standardization and other systems.

2019

Founded in 2019

2000

Registered capital 20 million RMB

100

More than 100 employees

More than 30 engineers

GROUP DEVELOPMENT

2019-present
New starting point: the establishment of Suzhou Hengdian Energy Co., Ltd.; open up the overseas electric motorcycle market and strategically cooperate with a number of energy storage giants; National small and medium-sized enterprises digital transformation pilot enterprises, self-invested in a number of 10MWh industrial and commercial energy storage projects, Southeast Asia shipments exceeded 200Mwh;
2017-2018
Breakthrough: mass production and delivery of Dongfeng commercial vehicle machines; Zotye Junma vehicle navigation mass production and delivery; NIO's first-tier supplier;
2015-2016
Progress: DPCA first-tier supplier; SAIC Maxus Tier 1 Supplier; Strategic cooperation: Shenzhen Tianpai Electronics - increase production capacity;
2012-2014
Development: Jiangsu High-tech Enterprises; Dongfeng Citroen, Toyota, Subaru suppliers; Operate Beidou smart city business;
2011
R&D: Invest in the establishment of Wuhan R&D center TS16949 system certification
2010
Set sail: Henderson was established

R & D STRENGTH

PRODUCTION PROCESS

Quality Department
1.The PMC issues a production work order as PO required
2.The warehouse prepares all materials according to quantity required by work orders, and manufacturing picker needs to check the number of materials again.
3.The PE completes the wiring of production line and making of the first piece according to the production model of the work order.
4.IPQC finishes the inspection of first piece according to SIP requirements, and records the related check form.
5.The production line carries out the assembly operations of each station according to the SOP method.
6.The assembled semi-finished product should be tested according to the SOP requirements. Good products are put into the next station, and defective products are transferred to the repair station.
7.Good Semi-finished products conduct aging test according to the SOP requirements. Good products are put into the next station, and defective products are transferred to the repair station.
8.The production line carries out the package operations of each station according to the SOP method.
9.The packaged finished product should be tested according to the SOP requirements. Good products are put into the next station, and defective products are transferred to the repair station.
10.Complete the bagging and packing of finished products according to SOP requirements.
11.After packing the finished products, it needs to issue the inspection application form along with the finished products to the OQC. If tested by the model specification passes, the qualified inspection form should be notified to the warehouse for storage preparation, and the unqualified products have to be returned to production line.
12.The qualified products complete the storage operation with attached OQC inspection certificate.

Manufacture Department
1.The PE completes the wiring of production line and making of the first piece according to the production model of the work order.
2.IPQC finishes the inspection of first piece according to SIP requirements, and records the related check form.
3.The production line carries out the pre-processing operations of each station according to the SOP method.
4.BMS conducts test operations according to the SOP requirements. Good products are put into the next station, and defective products are transferred to the repair station.
5.After the defective products are transferred to maintenance process, the related technician will repair them according to the maintenance SOP. The good reworked products should be put back into the first station and re-flowed the whole production process.